Messduse Ldü 38
Verfasst: 24 Mai 2021 19:18
Hallo,
Ich lebe in Frankreich und mit einigen Freunden wollen wir einen Schulgleiter SG-38 restaurieren oder bauen.
Dafür haben wir nur alte Pläne aus der Vergangenheit, die nicht sehr lesbar sind, was zu vielen Fragen führt.
Dies sind die Fragen, die uns dazu bringen, im Internet nach Antworten zu suchen.
Während ich das Netz durchsuchte, sah ich die Bilder eines Venturi unter diesem Link:
https://www.deutscheluftwaffe.de/fl-222 ... duese-1936
Ist es möglich, Bilder von beiden Seiten der Innenseite des Venturi zu haben?
Wofür sind die hintere Mutter und Schraube?
Das Venturi wird mit 4 Schrauben befestigt. Wie werden statische und dynamische Druckrohre abgedichtet? (O-Ring?)
Alle Fotos sind willkommen.
Ein sehr großes Dankeschön für Ihre Hilfe.
André
Verzeihen Sie mir, wenn die deutsche Übersetzung schwer zu verstehen ist, habe ich Google verwendet.
Entschuldigen Sie die Moderatoren, wenn ich in diesem Abschnitt einen Fehler gemacht habe
-----------------------------------------------------------------------------------------------------------------------------
Hello,
I live in France and with friends we want to restore or build a Schulgleiter SG-38.
For that, we only have old plans from the past, not very readable, which leads to a lot of questions.
These are the questions that drive us to seek answers on the internet.
It was while searching the web that I saw the pictures of a venturi on this link:
https://www.deutscheluftwaffe.de/fl-222 ... duese-1936
Is it possible to have pictures of both sides of the inside of the venturi?
What are the rear nut and screw for?
The venturi is fixed by 4 screws. How is static and dynamic pressure tubes sealed? (O-ring ?)
All photos are welcome.
A very very big thank you for your help.
André
--------------------------------------------------------------------------------------------------------------------------
Bonjour,
J’habite en France et avec des amis nous souhaitons restaurer ou construire un Schulgleiter SG-38.
Pour cela, nous n’avons que de vieux plans d’époque, pas très lisibles, ce qui amène beaucoup de questions.
Ce sont ces questions qui nous poussent à chercher des réponses sur internet.
C’est en cherchant sur le net que j’ai vu les photos d’un venturi sur ce lien :
https://www.deutscheluftwaffe.de/fl-222 ... duese-1936
Est-il possible d’avoir des photos des deux côtés de l’intérieur du venturi ?
A quoi servent l’écrou et la vis à l’arrière ?
Le venturi est fixé par 4 vis. Comment est faite l’étanchéité des tubes de pression statique et dynamiques ? (Joint torique ?)
Toutes les photos sont les bienvenues.
Un très très grand merci pour votre aide.
André
Ich lebe in Frankreich und mit einigen Freunden wollen wir einen Schulgleiter SG-38 restaurieren oder bauen.
Dafür haben wir nur alte Pläne aus der Vergangenheit, die nicht sehr lesbar sind, was zu vielen Fragen führt.
Dies sind die Fragen, die uns dazu bringen, im Internet nach Antworten zu suchen.
Während ich das Netz durchsuchte, sah ich die Bilder eines Venturi unter diesem Link:
https://www.deutscheluftwaffe.de/fl-222 ... duese-1936
Ist es möglich, Bilder von beiden Seiten der Innenseite des Venturi zu haben?
Wofür sind die hintere Mutter und Schraube?
Das Venturi wird mit 4 Schrauben befestigt. Wie werden statische und dynamische Druckrohre abgedichtet? (O-Ring?)
Alle Fotos sind willkommen.
Ein sehr großes Dankeschön für Ihre Hilfe.
André
Verzeihen Sie mir, wenn die deutsche Übersetzung schwer zu verstehen ist, habe ich Google verwendet.
Entschuldigen Sie die Moderatoren, wenn ich in diesem Abschnitt einen Fehler gemacht habe
-----------------------------------------------------------------------------------------------------------------------------
Hello,
I live in France and with friends we want to restore or build a Schulgleiter SG-38.
For that, we only have old plans from the past, not very readable, which leads to a lot of questions.
These are the questions that drive us to seek answers on the internet.
It was while searching the web that I saw the pictures of a venturi on this link:
https://www.deutscheluftwaffe.de/fl-222 ... duese-1936
Is it possible to have pictures of both sides of the inside of the venturi?
What are the rear nut and screw for?
The venturi is fixed by 4 screws. How is static and dynamic pressure tubes sealed? (O-ring ?)
All photos are welcome.
A very very big thank you for your help.
André
--------------------------------------------------------------------------------------------------------------------------
Bonjour,
J’habite en France et avec des amis nous souhaitons restaurer ou construire un Schulgleiter SG-38.
Pour cela, nous n’avons que de vieux plans d’époque, pas très lisibles, ce qui amène beaucoup de questions.
Ce sont ces questions qui nous poussent à chercher des réponses sur internet.
C’est en cherchant sur le net que j’ai vu les photos d’un venturi sur ce lien :
https://www.deutscheluftwaffe.de/fl-222 ... duese-1936
Est-il possible d’avoir des photos des deux côtés de l’intérieur du venturi ?
A quoi servent l’écrou et la vis à l’arrière ?
Le venturi est fixé par 4 vis. Comment est faite l’étanchéité des tubes de pression statique et dynamiques ? (Joint torique ?)
Toutes les photos sont les bienvenues.
Un très très grand merci pour votre aide.
André